Knowing the basic operations is a must if you consider buying a hot tub and coming across a Balboa hot tub.
There are many different hot tub producers; some are superior and more reputable than others. But among them, Balboa is probably one of the manufacturers you will hear about. In fact, high-quality hot tub components, including heaters, topside panels, and hot tub shells, are produced by the Balboa Water Group.
So if you are a brand new balboa hot tub owner and learning how to operate it, this article is for you. Read until the end as we learn how to turn off a Balboa hot tub and other important things you need to know about its operation.
Turning Off Balboa Hot Tub In 3 Ways
Generally speaking, hot tubs should be left on; continually turning them on and off wastes electricity as the heater constantly needs to warm the water temperature.
Still, you will need to turn off your Balboa hot tub for important reasons like not using a warm water temperature for a long time because you are going on a vacation; regardless, you�ll have to turn it off because you’ll have to clean it every 3 to 4 months.
Additionally, shutting it down is a must if you are going to operate any mechanical or electrical maintenance work on the circuit board to avoid risks like electrocution.
To do this, follow five easy steps or ways
1. Locate The Disconnect Box
You will need to locate the breaker or the ground fault circuit interrupter in the disconnection box of the hot tub and flip it. It will be at least 5 feet from the hot tub but no more than 50 feet away. It will most likely be attached to the side or back of your house near the hot tub. You can also ask the dealer or service organization who installed your hot tub to guide you.
2. Flip The Disconnect Box’s Hatch.
There is a sizable circuit breaker inside it. Your connection will be turned off as soon as you flip that switch to the off position. To ensure that no electricity goes to the hot tub, you must turn off both switches if there are two.
3. Unplug From The Power Supply
If you own a Balboa plug-and-play hot tub, simply unplugging it from the main power source will turn off the hot tub in the control system.
You may also have to drain the hot tub�s water, especially if you will not use it for longer. It is extremely important never to operate a spa tub without water because so would cause potential harm to your hot tub circulation pump and heater.
Frequently Asked Questions
Here are some frequently asked questions about how to turn off a Balboa hot tub.
Do Hot Tubs Automatically Turn Off?
Almost all systems, including Balboa, Gecko, Smart Touch, etc., only allow the water jets to operate for a set period when the hot tub heats, typically 15 or 20 minutes, before turning themselves off.
How Do I Get My Balboa Hot Tub Out Of Sleep Mode?
Balboa has features like economy mode and rest mode. Press temperature and then repeatedly light until the LCDs “MODE” exit the rest mode. Pressing temp will cycle through READY and REST. To return to the Main Screen, press the light or stand in line for 10 seconds. You can do a system configuration using these modes to know if it has an extended pump operation.
Why Does My Hot Tub Jets Keep Running?
Your hot tub’s jets quickly and forcefully expel water, which aids in the filtration cycle. The automatic activation of the hot tub jets as the pump begins to operate during the filtration cycle is part of its programmed filter cycles. This is a normal operation and lasts for a few hours.
Can You Manually Turn Off Hot Tub Jets?
Using the control panel, you can shut off the hot tub pump and jet when the hot tub isn’t in use. This will result in energy savings. It is not advised to shut off the circulation pump.
Do Hot Tub Jets Run When Heating?
When it is heating, the jets do not operate maintaining the same temperature, but the pump that moves water through the pipes may appear alike. However, after adding more water to it, manually turning on the jets will hasten the heating process.
Conclusion
There is no problem with turning off your hot tub given that you will do so because you will be going to use it for a long time; you will fix a mechanical or technical issue or do regular cleaning maintenance. But, it is not advised to do so frequently because it is not energy efficient. When turning off your Balboa hot tubs, follow the above steps and utilize the different economy modes or rest modes as an alternative option.
